Menu
Surface Preparation:
Surface must be clean and smooth. Residues of previous coatings should be removed, and uneven surfaces should be leveled. Also, the moisture content of the floor should be checked because damp floors can reduce the effectiveness of ceramic adhesives.
Material Selection:
The type and classification of ceramic tiles should be selected based on the area of use and expectations. For example, frost-resistant ceramics should be preferred for outdoor areas.
Adhesive Selection:
The choice of ceramic adhesive depends on the floor type and the characteristics of the ceramic tiles. The adhesive should be water-resistant and flexible. The manufacturer’s instructions must be followed.
Expansion Joints:
Expansion joints should be left in large areas and along wall edges. Temperature changes and floor movements prevent tiles from cracking using these expansion joints.
Appropriate Equipment and Techniques:
The correct use of equipment is important in ceramic cutting and correction. Suitable saws for cutting operations and correct correction materials for correction operations should be used.
Waterproofing:
Waterproofing should not be neglected in wet areas (such as bathrooms, kitchens). Attention should be paid to wall and floor joints, and waterproofing materials should be applied correctly.
Maintenance and Cleaning:
Regular cleaning of ceramic floors prevents the accumulation of dirt and stains, especially using suitable cleaning materials and methods.
Compliance with Application Instructions:
Ceramic material and adhesive manufacturers must strictly adhere to their instructions. These instructions help prevent problems that may arise during and after application.
By paying attention to these steps in detail, longer-lasting and aesthetic results can be achieved in ceramic applications.
| PRODUCT CODES | PRODUCT NAME | WEIGHT | COLOUR | PRODUCT GROUP |
| 1000 | KARÇİMSA MASONRY SUPERWHITE | 25,00 | WHITE | CEMENT |
| 1010-1011 | KARÇİMSA STANDARD | 25,00 | GREY-WHITE | ADHESIVES |
| 2020-2021 | KARÇİMSA MASTERFLEX | 25,00 | GREY-WHITE | |
| 3030-3031 | KARÇİMSA PREMIUM ULTRAFLEX | 25,00 | GREY-WHITE | |
| 1050-1051 | KARÇİMSA STANDARD | 20,00 | GREY-WHITE | |
| 2050-2051 | KARÇİMSA MASTERFLEX | 20,00 | GREY-WHITE | |
| 3050-3051 | KARÇİMSA PREMIUM ULTRAFLEX | 20,00 | GREY-WHITE | |
| 4000-4001 | KARÇİMSA ECO | 25,00 | GREY-WHITE | |
| 4005-4006 | KARÇİMSA ECO | 20,00 | GREY-WHITE |
Considerations for External Facade Cladding and Thermal Insulation Applications
Material Selection:
When selecting thermal insulation materials, factors such as building characteristics, climate conditions, and budget should be considered. Commonly used materials include EPS (Expanded Polystyrene), XPS (Extruded Polystyrene), rock wool, and glass wool. Material selection affects long-term durability and insulation performance.
Compliance with Application Standards:
Working in accordance with relevant standards and regulations ensures effective thermal insulation. Compliance with local building codes and standards is important during application.
Preparation of Wall Surface:
Before applying thermal insulation materials, the wall surface must be clean, smooth, and dry. It is important to clean old paints, dirt, and debris. Additionally, cracks and other structural problems should be corrected.
Prevention of Thermal Bridges:
Thermal bridges can reduce the effectiveness of thermal insulation. Special details and materials should be used to prevent thermal bridges at window frames, facade elements, and other connection points.
Waterproofing:
Waterproofing should also be considered in external facade insulation applications. Waterproofing prevents deterioration of facade materials and loss of performance of insulation materials.
Professional Application:
External facade insulation applications should be carried out by experienced and expert individuals. Attention should be paid to details during application and materials should be correctly installed.
Fire Safety:
The fire resistance and fire safety of the thermal insulation materials used are important. Fire class and fire resistance tests should be considered in material selection.
Facade Design:
During thermal insulation applications, attention should be paid to an aesthetically pleasing facade design. Color and texture selection should be compatible with building architecture.
By paying attention to these considerations, external facade insulation applications can enhance energy efficiency, improve building comfort, and support long-term durability.
| PRODUCT CODES | PRODUCT NAME | WEIGHT | COLOUR | PRODUCT GROUP |
| 4010-4014 | KARÇİMSA CEMENT-BASED DECORATIVE FACADE COATING | 25,00 | WHITE | EXTERIOR COATING AND THERMAL INSULATION SYSTEMS |
| 4020-4021 | KARÇİMSA THERMAL INSULATION PANEL PLASTER | 25,00 | GREY | |
| 4022 | KARÇİMSA THERMAL INSULATION PANEL ADHESIVE | 25,00 | GREY |
Material Selection:
The selection of masonry and repair mortars should be made according to the area of use and requirements. For example, mortars to be used in the restoration of historical buildings should be able to mimic the properties of the original material.
Preparation of Application Area:
Before application, it is important to clean the surface, remove old mortar and paint residues. The surface must be smooth and the moisture content must be checked.
Water and Material Ratio:
Attention should be paid to the water and material ratio in the mortar mixture. Correct ratios can increase the durability and performance of the mortar. Adherence to the ratios determined by the manufacturer is important.
Use of Correct Techniques:
The use of correct techniques is important in mortar applications. Especially in the restoration of masonry buildings, attention should be paid to traditional application methods.
Adaptation:
Masonry and repair mortars should be compatible with the surrounding original materials. Adaptation is important in terms of color, texture, and durability.
Reinforcement and Enhancement:
If necessary, reinforcements and enhancements should be used in the repair of masonry buildings. Such solutions can strengthen the structural properties of the building.
Appropriate Curing Time:
The curing time of the mortar should be in accordance with the manufacturer’s instructions. Rushing can affect the durability of the mortar.
Climate Conditions:
Attention should be paid to weather conditions during and after mortar applications. Application should not be done especially in rainy or freezing weather conditions and the mortar should be allowed to dry under suitable conditions.
Protective Measures:
Necessary measures should be taken to protect other structural elements and the environment during application. Especially protection from environmental pollution and other harmful effects should be ensured.
By paying attention to these factors, quality and durable results can be achieved in masonry and repair mortar applications.
| PRODUCT CODES | PRODUCT NAME | WEIGHT | COLOUR | PRODUCT GROUP |
| 5010-5013 | KARÇİMSA CEMENT-BASED READY PLASTER | 25,00 | GREY-WHITE | MORTAR AND REPAIR MORTARS |
| 5020-5023 | KARÇİMSA REPAIR MORTAR | 25,00 | GREY-WHITE | |
| 5030 | KARÇİMSA BRICK-PUMICE MASONRY BLOCK | 25,00 | GREY |
Surface Analysis:
Before starting surface strengthening, the type and condition of the surface should be carefully analyzed. This will help determine the correct material selection and suitable application method.
Selection of Suitable Materials:
The material to be used must be suitable for the properties, purposes, and environmental conditions of the surface. For example, polymer-modified materials may be preferred for applying a waterproof coating to concrete surfaces.
Surface Cleaning and Preparation:
The surface must be clean, dry, and smooth. Cleaning of dirt, dust, and old coatings is important. Proper preparation helps the applied material adhere better and be more effective.
Weather Conditions:
Attention should be paid to weather conditions during and after application. Factors such as temperature, humidity, and rainfall can affect the drying time and performance of the material.
Application Techniques:
The use of correct techniques during application is important. Following the manufacturer’s recommended application instructions ensures the material performs at its best.
Durability Against Environmental Factors:
The materials used for surface strengthening and protection must be resistant to environmental factors. Materials that resist sunlight, rain, and chemicals should be preferred.
Equipment and Safety:
Appropriate equipment should be used during application, and safety measures should be taken. Workers should use appropriate protective equipment and comply with safety rules.
Guarantee and Maintenance:
The material used must be applied and followed according to the manufacturer’s guarantee and maintenance instructions. This ensures long-term performance and durability.
By paying attention to these aspects, surface strengthening and protection material applications can achieve more effective results.
| PRODUCT CODES | PRODUCT NAME | WEIGHT | COLOUR | PRODUCT GROUP |
| 6010 | KARÇİMSA SELF-LEVELING SCREED | 25,00 | GREY | SURFACE STRENGTHENING AND PROTECTION MATERIALS |
| 6020 | KARÇİMSA RAW CONCRETE PRIMER | 12,00 | DUSTY ROSE COLOR | |
| 6030 | KARÇİMSA CERAMIC SURFACE PRIMER | 5,00 | GREEN | |
| 6031 | KARÇİMSA CERAMIC SURFACE PRIMER | 10,00 | GREEN |
Surface Preparation:
Before waterproofing application, the surface must be clean, smooth, and dry. Cleaning of old coatings and dirt ensures proper surface preparation.
Selection of Correct Materials:
The waterproofing material to be used should be selected according to the project requirements and application area. Various options include liquid membranes, membrane strips, bituminous materials, etc.
Detailed Application Plan:
Waterproofing, especially in detailed areas (expansion joints, piping transitions, edge areas), should be carefully applied. These details form critical points to prevent water leaks.
Attention to Connection Points:
Attention should be paid especially to connection points such as wall-basement, wall-floor, window-facade junctions. Waterproof seals should be placed in these areas and correct connection techniques should be used.
Slope and Drainage:
Slopes and drainage arrangements should be made on waterproofed surfaces. Surfaces should be inclined to prevent water accumulation and effective drainage of water should be ensured.
Testing and Controls:
After waterproofing is completed, tests should be conducted to check for water leaks. This is important to verify that the application is successful and reliable.
Weather Conditions During Application:
Weather conditions should be considered during waterproofing application and afterwards. Especially in rainy and cold weather conditions, application should not be done.
Compliance with Local Regulations and Standards:
Waterproofing applications should be carried out in accordance with local building codes, regulations, and waterproofing standards.
Professional Application:
Those who will carry out waterproofing applications must be trained and experienced. Professional application ensures successful waterproofing.
Waterproofing is critical for the durability of structures and protection of interiors. Therefore, it requires careful preparation and application processes.
| PRODUCT CODES | PRODUCT NAME | WEIGHT | COLOUR | PRODUCT GROUP |
| 7010 | KARÇİMSA ACRYLIC-BASED LIQUID MEMBRANE | 20,00 | WHITE | WATERPROOFING PRODUCTS AND ADDITIVES |
| 7020 | KARÇİMSA ACR-500 | 5,00 | WHITE | |
| 7030 | KARÇİMSA TWO-COMPONENT FULL-SPREAD WATERPROOFING MORTAR SET | 30,00 | GREY | |
| 7031 | KARÇİMSA TWO-COMPONENT FULL-SPREAD WATERPROOFING MORTAR SET (POWDER) | 20,00 | GREY | |
| 7032 | KARÇİMSA TWO-COMPONENT FULL-SPREAD WATERPROOFING MORTAR SET (LIQUID) | 10,00 | GREY | |
| 7040 | KARÇİMSA TWO-COMPONENT FULL-SPREAD WATERPROOFING MORTAR SET | 30,00 | WHITE | |
| 7041 | KARÇİMSA TWO-COMPONENT FULL-SPREAD WATERPROOFING MORTAR SET (POWDER) | 20,00 | WHITE | |
| 7042 | KARÇİMSA TWO-COMPONENT FULL-SPREAD WATERPROOFING MORTAR SET (LIQUID) | 10,00 | WHITE | |
| 7050 | KARÇİMSA TWO-COMPONENT SEMI-SPREAD WATERPROOFING MORTAR SET | 26,50 | GREY | |
| 7051 | KARÇİMSA TWO-COMPONENT SEMI-SPREAD WATERPROOFING MORTAR SET (POWDER) | 20,00 | GREY | |
| 7052 | KARÇİMSA TWO-COMPONENT SEMI-SPREAD WATERPROOFING MORTAR SET (LIQUID) | 6,50 | GREY | |
| 7060 | KARÇİMSA TWO-COMPONENT SEMI-SPREAD WATERPROOFING MORTAR SET | 26,50 | WHITE | |
| 7061 | KARÇİMSA TWO-COMPONENT SEMI-SPREAD WATERPROOFING MORTAR SET (POWDER) | 20,00 | WHITE | |
| 7062 | KARÇİMSA TWO-COMPONENT SEMI-SPREAD WATERPROOFING MORTAR SET (LIQUID) | 6,50 | WHITE |
Selection of Correct Materials:
Grout filling material should be chosen according to the application area and purpose. Various materials such as elastomers, silicones, and polyurethanes are available.
Surface Preparation:
It’s crucial that the grout filling area is clean, dry, and free of dust before application. Cleaning of old grout filling material and, if necessary, surface repair may be required.
Application Techniques:
Applying grout filling material with the correct techniques is vital. It should be applied uniformly and completely fill the grout gap for effective results.
Width and Depth Evaluation:
When selecting grout filling material, consider the width and depth of the grout. Accurate evaluation ensures the material fills the grout gap completely.
Flexibility and Movement Capability:
Grout filling materials should possess flexibility to accommodate normal movements of buildings or roads. This is essential to withstand structural movements, expansions, and contractions.
Air and Water Tightness:
Grout filling material must provide air and water tightness. It prevents water and air from penetrating into the building or underlying layers, thus preventing damage.
Freeze-Thaw Resistance:
Grout filling materials intended for outdoor use should be resistant to freeze-thaw conditions. This resilience is critical for long-term durability of the material.
Color and Aesthetic Compatibility:
The color and aesthetic appearance of grout filling material should harmonize with the application area. Selecting the right color contributes to achieving an aesthetic finish.
Application Temperature and Conditions:
Ensure the temperature and conditions during grout filling application align with manufacturer’s guidelines. Proper application temperatures facilitate effective material placement.
Maintenance and Inspection:
Regular maintenance and inspections should follow grout filling applications. If necessary, worn-out or damaged grout filling material should be replaced.
By adhering to these considerations, grout filling applications can effectively prevent water leaks, enhance durability, and achieve an aesthetic appearance.
| PRODUCT CODES | PRODUCT NAME | WEIGHT | COLOUR | PRODUCT GROUP |
| 8010 | KARÇİMSA FLEX JOINT | 20,00 | WHITE | GROUT FILLER |
| 8015 | KARÇİMSA FLEX JOINT | 5,00 | WHITE | |
| 8020 | KARÇİMSA SILICONE FLEX JOINT | 20,00 | WHITE | |
| 8025 | KARÇİMSA SILICONE FLEX JOINT | 5,00 | WHITE | |
| 8030 | KARÇİMSA FLEX JOINT | 20,00 | COLOURFUL | |
| 8050 | KARÇİMSA FLEX JOINT | 5,00 | COLOURFUL | |
| 8070 | KARÇİMSA SILICONE FLEX JOINT | 20,00 | COLOURFUL | |
| 8090 | KARÇİMSA SILICONE FLEX JOINT | 5,00 | COLOURFUL |